Adjusting The Zoom Stop Settings - American Dynamics SpeedDome Ultra 8 Operator's Manual

Changing the Automatic Flip Setting
1. Select Pan/Tilt/Zoom/Sync Opts from the Dome Configuration Menu.
The highlight bar appears on the Proportional Flip setting.
2. Change the setting.
• Select On to enable the flip feature.
•
Select Off to disable the flip feature.
The default setting is Off.
3. Select Exit. The Dome Configuration Menu appears.

Adjusting the Zoom Stop Settings

Zoom stop settings define how the zoom function is partitioned. Depending on the current
zoom level, the camera will either stop at the first zoom stop setting or continue to the
maximum zoom setting.
22X Camera Dome
The SpeedDome Ultra 8 22X camera dome includes a 22X optical zoom camera with 11X
digital zoom capability. The maximum possible zoom is 242X.
The following example explains how 22X camera zoom stop settings work.
The default 22X camera settings are 33X for the first zoom stop setting and 88X for the
maximum zoom setting. If the current zoom level is less than 33X, pressing Zoom In
continuously causes the zoom to stop at 33X. If the zoom level is 33X or greater, pressing
Zoom In continuously causes the zoom to stop at the maximum zoom setting of 88X. The
second zoom stop remains in effect until the zoom function is reduced to less than the first
zoom stop setting (33X) and the zoom button is released for one second or longer. To achieve
higher zoom levels, change the maximum zoom setting.
2X is the margin of error for the zoom stop settings.
Changing the 22X Camera Zoom Stop Settings
1. Select Pan/Tilt/Zoom/Sync Opts from the Dome Configuration Menu.
2. To change the first zoom stop, continue with step 3. To change the maximum zoom
setting, go to step 5.
3. Move the highlight bar to 1st Zoom Stop X, and change the setting.
• Select 22 to set the first zoom stop to 22X magnification.
•
Select 33 to set the first zoom stop to 33X magnification.
The default setting is 33X.
4. To change the maximum zoom setting, continue with step 5. Otherwise, go to step 6.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
20 of 140
8200-0600-01, REV. B