American Dynamics SpeedDome Ultra 8 Operator's Manual page 58

4. Highlight Sequence Setup Menu and press Focus Far. The Sequence Setup Menu
screen appears.
5. Highlight the Sequence Number field. Press Zoom In/Out to change values (1-16).
6. Highlight the Step field. Press Zoom In/Out to scroll through available steps. Steps are
displayed in groups of 1-4, 5-8, 9-12, and 13-16.
7. Highlight the Preset field and press Zoom In/Out until the desired Preset number
appears (1-96).
8. Highlight the Dwell Time Min field and press Zoom In/Out until the number of minutes
you want the Preset to remain on-screen appears (0-10 minutes).
9. Highlight the Dwell Time Sec field and press Zoom In/Out until the number of seconds
you want the Preset to remain on-screen appears (0-60 seconds in 10-second increments).
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Figure 42. Select Preset to Program screen
SELECT PRESET TO PROGRAM
PRESET
NUMBER PRESET NAME
1 PRESET
SEQUENCE SETUP MENU
CAMERA FUNCTIONS
FOCUS FAR to program preset
EXIT
Figure 43. Sequence Setup Menu screen
SEQUENCE SETUP MENU
SEQUENCE NUMBER
STEP 1-4
STEP PRESET
1 0
2 0
3 0
4 0
EXIT
56 of 140
1
1
DWELL TIME
MIN / SEC
0 0
0 0
0 0
0 0
8200-0600-01, REV. B