6. To display the Dome Configuration Menu in the selected language, press and hold Iris
Open, press and hold Focus Near or Focus Far, then press Zoom Out. Continue with step
7.
7. Do one of the following:
Working with Passwords
To prevent unauthorized use of the configuration utility, you may choose to enable password
protection. There are two parts to using passwords with your dome: setting a password and
enabling password use. The dome password can be from 1 to 8 characters long. The
characters available depend on the current language setting.
Setting or Changing the Dome Password
1. Select Language/Password from the Dome Configuration Menu.
2. Use the Tilt control to move the highlight bar to Set Password. Then press Focus Far.
The Set Password screen appears.
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z a b c d e f g h i j k l m n
Character Field:
o p q r s t u v w x y z
Use Pan / Tilt to
7 8 9 / -
move the cursor.
Press Focus Far
to select.
Figure 6-4: Set Password Screen
1
This command is not supported with Manchester.
6-4
To cancel the language change, press Focus Far. The Language Selection
screen displays. You may choose a different language, or use the Tilt control to
move the highlight bar to Exit to return to the Language / Password screen.
Continue with step 7.
If you want set the dome password, refer Working with Passwords on page 6-4.
If you are finished making changes, press and hold Iris Close, then press Focus
Near or Focus Far to save your changes and exit the utility.
If you want to make changes to other settings, continue with What To Do Next on
page 6-6.
SET PASSWORD
PASSWORD: * *
0 1 2 3 4 5 6
CONTINUE
CANCEL
1
Password Field:
Asterisks appear
as each character
is entered.
Blank space
character
Operator's Manual