Displaying Diagnostic Tests During Reset - American Dynamics SpeedDome Ultra 8 Operator's Manual

You can choose to disable displaying all name information, or you can choose to display
selected or all name information.
Changing the Display of All Name Information
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Disable All Names?
3. Change the setting.
• Select Yes to disable the appearance of all name information.
• Select No to enable the appearance of all or some name information. Then continue
with Configuring the Display of Name Information on page 76.
4. Select Exit. The Dome Configuration Menu appears.

Displaying Diagnostic Tests During Reset

You can choose to have dome diagnostic tests run whenever the dome resets. The diagnostic
information displayed includes:
• Communications Loopback Test
• Camera Loopback Test
•
Motor Circuit Test
If you do not want diagnostic information to appear when the dome resets, a screen displaying
the firmware version numbers for the Boot and Application code and the maximum optical
zoom for the dome appears.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Figure 61. Display Locations for Name Information
CAMERA NAME
PRESET NAME/PATTERN NAME
The default setting is No.
73 of 140
ALARM NAME
AREA NAME
8200-0600-01, REV. B