Changing The Settings For Text Displayed On-Screen - American Dynamics SpeedDome Ultra 8 Operator's Manual

8. Repeat step 7 until the name is complete.
9. Do one of the following:
• To save the name changes, select Exit.
• To discard the name changes, select Undo Changes and Quit.
10. Do one of the following:
• If you were changing the camera name, continue with step 12.
• If you were changing the name of an area, preset, pattern or alarm, the Select Name to
Program screen appears. Continue with step 11.
11. Do one of the following:
• To make additional changes to the same type of name selected in step 3, repeat steps 4
through 10.
• To return to the Name Configuration Menu, select Exit, and continue with step 12.
12. Do one of the following:
• To make additional name changes, repeat steps 3 through 11.
•
To return to On-Screen Text Display, select Exit. Continue with step 13.
13. Select Exit. The Dome Configuration Menu appears.

Changing the Settings for Text Displayed On-Screen

You may customize the way text is displayed on-screen. You have the choice of displaying
text as translucent (slightly clear) or solid, with or without outlines.
To change these settings, select Text Attribute Options from the On-Screen Text Display
screen. The following screen appears:
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Figure 68. Text Attribute Options screen
TEXT ATTRIBUTE OPTIONS
CHARACTER OUTLINE
TRANSLUCENT NAMES
EXIT
79 of 140
ON
4
8200-0600-01, REV. B