Accessing The Directset Menu - American Dynamics SpeedDome Ultra 8 Operator's Manual

Accessing the DirectSet Menu

The DirectSet Menu provides easy access to commonly used SpeedDome Ultra 8 camera dome
features when used with compatible controllers. This allows you to change or activate features
without starting the dome configuration menu. Four pages of menu options are available for
the 35X camera dome (Figure 3 through Figure 6 below) and the 22X camera dome (Figure 7
through Figure 10 on page 15).
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
I M P O R T A N T
The following settings do not restore when selecting Quit Without Saving from the
Dome Configuration Menu: Area Boundaries and AGC/Shutter Limit.
Note: Some DirectSet menu features are not supported by the 22X camera dome.
Each menu feature description in Table 2 beginning on page 16 shows which
camera dome supports that feature.
Figure 3. DirectSet Menu (35X)–Page 1 of 4
0 TOGGLE DIRECT SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS & AUTO FOCUS
3 FLIP
4 PEEL PATTERN
5 SET NORTH POSITION
6 LINE LOCK OFF
7 LINE LOCK ON
10 NIGHT MODE
FOCUS FAR=next page
13 of 140
8200-0600-01, REV. B