Supported Controllers; Performance Notes - American Dynamics SpeedDome Ultra 8 Operator's Manual

Supported Controllers

The following AD-UTC controllers are compatible with the SpeedDome Ultra 8 camera dome:
Controller
ADCC0200
ADCC0300
This list of controllers is complete as of the time of publication. Other controllers may be
supported. Contact your Sales Representative for current information.

Performance Notes

The following considerations should be made when using the SpeedDome Ultra 8 camera
dome in the AD-UTC environment.
Address Setting
The SpeedDome Ultra 8 camera dome must be set to address 891 to operate in the AD-UTC
environment. When the dome initializes or resets, the address and protocol information
(UTC_T) appear on-screen.
Accessing the DirectSet Menu
The DirectSet Menu provides easy access to certain SpeedDome Ultra 8 camera dome
functions from the keyboard. Both the 35X and 22X camera domes each have four pages of
settings available.
To access the DirectSet menu, select the dome, and press
FOCUS FAR=next page
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Presets
96
96
DirectSet Menu 1of 4
0 TOGGLE DIRECT SET MENU
1 DOME CONFIGURATION MENU
2 AUTO IRIS & AUTO FOCUS
3 FLIP
4 PEEL PATTERN
5 SET NORTH POSITION
6 LINE LOCK OFF
7 LINE LOCK ON
10 NIGHT MODE
Patterns
3
3
35X Camera Dome
11 DAY MODE
12 AUTO DAY/NIGHT MODE
13 WDR ON
14 WDR OFF
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFORMATION
48 EIS OFF
Use FOCUS to select page
117 of 140
DirectSet Menu
Yes
Yes
(DirectSet button).
DirectSet Menu 2of 4
8200-0600-01, REV. B