Setting The Minimum Alarm Volume; Setting The Alarm Tone Type; Exiting Customer Service Mode - Dräger Oxylog 3000 plus Instructions For Use Manual

Setting the minimum alarm volume

1 Select the Minimum Level (Minimum Level)
line and confirm.
2 Select the minimum alarm volume by turning
the rotary knob and confirm.
NOTE
The user cannot set an alarm volume below the set
minimum alarm volume.

Setting the alarm tone type

1 Select the Alarm sequence (Alarm sequence)
line and confirm.
2 Select the alarm tone type DRAEGER or IEC by
turning the rotary knob and confirm.
NOTE
The user cannot change the preset alarm tone
type.
Instructions for use Oxylog 3000 plus SW 1.n

Exiting Customer Service Mode

1 Press the key for approximately 3 seconds;
the indicator flashes yellow.
To turn ventilation on:
2 Briefly press the key
Procedure to switch off the device:
3 Press the rotary knob.
Configuration
.
107