Accessories; Connection Cables For Communication - Jetter JetMove 3000 User Manual

A.6 Accessories
We have supplemented the JM-3000 system with great number of accessories. Important components
are, for example:
Synchronous servo motors
y
Prefabricated motor cables
y
Prefabricated encoder cables
y
Data cables for fieldbus and cross communication
y
Connector sets
y
PC user software - e.g. JetSym
y
Line filter - reduces the conducted high-frequency interferences of the servo amplifier (for use along with the
y
JM-3000 supply unit)
Line reactor - reduces the voltage distortion (THD) in the mains and increases the service life of the servo
y
amplifiers (for use along with the JM-3000 supply unit).
Braking resistor - converts excess regenerative energy into heat and thus enables an even more dynamic
y
motion process (for use with the JM-3000 supply unit).
A.6.1 Connection cables for communication
Type: XCOM
Type: ECAT
70
Jetter item number: 60879945_00
Communication cable set JM-3000, 1 piece each:
• RJ-10 cross communication, 0.25 m
• RJ-45 patch cable SF/UTP, Cat 5e, 0.25 m
JetMove 3000 Supply Unit
Jetter AG