Table of Contents
Advertisement
JetMove 3000 Supply Unit
Personal qualifications:
To avoid personal injury and damage to property, only qualified per-
‚
sonnel with electrical engineering training may work on the device.
The qualified person must be familiar with the operating instructions
‚
(see IEC 364, DIN VDE 0100).
Knowledge of national accident prevention regulations (e.g. BGV A3,
‚
in Germany)
During the installation, follow the instructions below:
Always comply with the connection conditions and technical data.
‚
Observe the standards for electrical installation, such as conductor
‚
cross-section and protective conductor and grounding connections.
During the installation, follow the instructions below:
Do not touch electronic components or contacts (electrostatic dis-
‚
charge can destroy components).
1.2
Warning symbols
The safety instructions describe the following danger classes.
The hazard class describes the risk when the safety instructions are not followed.
Warning symbols
Table 1.1 Explanation of warning symbols
14
Hazard class according to
ANSI Z 535
DANGER!
WARNING!
CAUTION!
DANGER
from electrical
voltage!
CAUTION hot surface!
Consequences of non-observance
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if
not avoided, will result in minor or moderate injury.
Death or serious injury will result if the appropriate
precautions are not taken.
CAUTION indicates a hazardous situation which, if
not avoided, will result in minor or moderate injury.
Safety
Jetter AG
Advertisement
Table of Contents
