Table of Contents
Advertisement
JetMove 3000 Supply Unit
A.2.1 Technical data - Brake chopper BG 2
Device
Mains voltage
Power electronics - brake chopper
Operating point - brake chopper
Transient protection
Continuous braking power [kW]
Peak braking power for max. 0.5 s *)
Maximum ohmic resistance of an
externally connected brake resistor
Minimum ohmic resistance of an
externally connected brake resistor
Supply unit with integrated brake resistor: Configuration JM-3P22-R1
Continuous braking power
Peak braking power for max. 0.5 s *)
Ohmic resistance of the
integrated brake resistor
*) After this time the device is switched off after I²t
Table A.4 Technical data - Brake chopper BG 2
NOTICE
Jetter AG
230 V AC
DAMAGE TO THE DEVICE DUE TO CONNECTION OF AN
ADDITIONAL EXTERNAL BRAKE RESISTOR
IGNORING THESE INSTRUCTIONS COULD RESULT IN DAMAGE
TO MATERIAL
y Do not connect any additional external brake resistors to devices
with integrated brake resistor.
JM-3P22/JM-3P22-C1
400 V AC
411 V
652 V
446 V
687 V
6 kW
32 kW
90 Ω
15 Ω
200 W
6 kW
28 Ω
480 V AC
765 V
800 V
65
Advertisement
Table of Contents
