Orientation; Scaling Modes - Barco F80 User Manual

2. Confirm to reset the frame to its center position.
Wait until the frame motors have stopped before doing other actions.

8.7 Orientation

What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
• Desktop front
• Desktop rear
• Ceiling front
• Ceiling rear
• Auto front: The projector detects itself if it is ceiling or table mounted and projects always a readable
image.
• Auto rear: The projector detects itself if it is ceiling or table mounted and projects always a readable image.
How to set the correct orientation
1. In the main menu, select Installation → Orientation.
Image 8–14 Installation menu, orientation
The Orientation menu is displayed.
Image 8–15 Example of the orientation menu
2. Use the ◄ or ► keys to select the projector orientation mode and press OK to activate.

8.8 Scaling modes

About scaling modes
While the default mode of projection is to fill the screen while respecting the aspect ratio (fill aspect), it is also
possible to stretch the image in a different way. You can choose from one of the following scaling methods:
GUI – Installation
R5906852 /06 F80 77