Barco F80 User Manual page 32

Input & Communication
Button
Shutter button
LED Status
The LED status is located on the top side of the projector, near the IR receiver.
During normal operation the LED is unlit. In the event of a critical error or high temperature, the LED will
display red.
By critical error, the projector cannot be restarted until the projector is disconnected from the power supply and
then reconnected again. If the reason for the error persist, the projector will again go to critical error status.
By high temperature, the projector will restart when it has cooled down, and temperatures are back within the
normal operating limitations.
32 R5906852 /06 F80
Color status
Blinking BLUE
Solid BLUE
Blinking RED
Off (no color)
Solid WHITE
Solid RED
Description
Projector goes to ON mode
Projector is ON
Error condition
Projector is OFF, starts up, or is in
Standby mode.
Projector is ON, shutter is open
Projector is ON, shutter is closed