Setting A Custom Projector Name - Barco F80 User Manual

Image 10–11 Example of the IR control menu
2. To disable an IR sensor, select the slider and drag to the left.
A blue slider means an active IR sensor.
A gray slider means an inactive IR sensor.
3. Select APPLY and click OK to apply the changes.

10.3 Setting a custom projector name

What can be done?
The default name of the projector is "Pulse". However, you can change this name to make it easier to spot in a
network with multiple devices or projectors
How to set a different Host name
1. In the main menu, select Settings → Communication → Host name.
Image 10–12 Settings menu, host name
The Host name menu is displayed.
Image 10–13 Example of the host name menu
GUI – System Settings
R5906852 /06 F80 117