The table below describes the different Stitch Layouts and scan directions.
Type of layout
1
: Single
1
2
: Dual 1 x 2
1
: 2 x single
How to select a stitched layout
1.
Press Menu to activate the menus and select Source.
Image 6–3 Select source
2.
Press OK.
The Select Source menu is displayed with the actual available sources filled out, including all available
stitched layout options.
Image 6–4 Input selection menu, the stitched options
3.
Select the desired stitched input.
6.3 Connector Settings
About Connector Settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
Description
A single source is displayed in
full screen
Two inputs are required. The
sources are displayed next to
each other.
Two inputs are required. The
sources are displayed one
above the other.
Available connectors
•
SDI
•
HDBaseT
•
DisplayPort (x2)
•
Dual link DVI-D (x2)
•
HDMI
•
2x DisplayPort
•
2x dual link DVI-D
•
2 x DisplayPort
•
2x dual link DVI-D,
R5906852 /06
GUI – Source
Mode
Mono / Active
stereo
Mono / Active
stereo
Passive stereo
F80
51