Local Keypad And Lcd Panel; Power Modes - Barco F80 User Manual

Getting Started

4.1 Local Keypad and LCD panel

Overview
Image 4–1
1 Menu navigation
2 Menu confirmation, OK button
3 Menu open / close
4 Menu back
5 Power on / off
6 Project OSD on / off
Local Keypad
The Keypad gives direct access to several functions, in addition to access to the menu system.
The keypad has a backlight that can be switched on and off manually. By default the light turns off after 5
minutes.
The Power button and Shutter buttons are equipped with white, blue and red backlit LEDs. The other keys are
only equipped with white and blue backlit LEDs. The LEDs are controlled according to the features available.
LCD panel
The LCD panel has two main functions:
1. Showing the menus, the adjustment information and also a mirror of the OSD, (On Screen Display)
described in User Interface when this is enabled.
2. Information regarding the status of the projector showing this data:
- Projector status
- Network address
- Active source
- Current firmware version
- Operation Data
- Active functions (Enabled Functions).
Toggle between the two indications by using the Menu button on the keypad, or on the remote control.
The LCD Display will fade out 30 seconds after the last key operation.

4.2 Power modes

General
The table below details the F80 power modes.
34 R5906852 /06 F80
1 2 3 4
11 10 9 8
5 6
7
7 Input selection
8 Shutter open / close
9 Test patterns
10 Lens adjustment
11 LCD panel