Specifications Of The F80-4K12 - Barco F80 User Manual

Control
Network connection
Power requirements
24/7 operation
Power consumption
BTU per hour
Standby power
Noise level (typical at 25°C/
77°F)
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Dimensions (WxLxH)
Weight
Standard accessories
Certifications
Warranty
*
A.6 Specifications of the F80-4K12
Overview
Projector type
Technology
Resolution
Brightness
Contrast ratio
Brightness uniformity
Aspect ratio
Blend
Lens type
Lens range
IR, RS232, RJ45, XLR wired
10/100 Ethernet, RJ45
100-240V / 50-60Hz
Yes
950 W nominal, 1100 W maximum
3,250 BTU/h nominal, 3,800 BTU/h maximum
<0.5W
35 dB(A)
10°C (50°F)- 40°C (104°F) (up to 1500m altitude) / 10° (50°F) - 35°C (95°
F) (up to 3000m altitude)
-20 to 60 °C
20-80% RH (non-condensed)
20-90% RH (non-condensed)
480 x 680 x 227 mm / 18.9 x 26.7 x 8.9 in
25.5 kg / 56.2 lbs
Power cord, wireless remote control
CE, FCC Class A, cNemkoUS, CCC, EAC, KSA, RCM, UkrSEPRO
Limited 3 years parts and labor. Extendable up to 5 years
* When measured with the GLD 1.43-2.12:1 lens in Wide Angle
** SW upgradable. Please contact an authorized Barco representative for
details.
Single-chip DLP laser phosphor projector
0.67" DMDTM x1
3,840 x 2,400 (4K UHD) / 2,716 x 1,600 (WQXGA+ native)
11,300 center lumens
10,700 ANSI lumens
12,000 ISO lumens
1,200:1 sequential, 10,000:1 dynamic**
> 90%
17:10 native
horizontal and vertical edge blending
GLD / FLD+ (lens adapter needed) / FLDX (lens adapter needed)
GLD-range: 0.8 - 1.0 ; 1.0 - 1.35 ; 1.35 - 2.0 ; 2.0 - 3.0
Specifications
R5906852 /06 F80 153