Barco F80 User Manual page 87

Image 8–39
3. Select the desired slider and confirm.
Image 8–40
4. Adjust angle and linearity (length) individually to obtain the correct correction. Press enter to confirm and
to switch between angle and length.
Tip: Adjust the angle by using the up and down arrow keys. Adjust the linearity by using the left
and right arrow keys.
5. Repeat the previous steps for each side of the picture that must be corrected.
6. When completed, a transformation will occur in a way similar to the following example. Observe that the
upper side of the picture now has an asymmetric correction.
Image 8–41 Example of an asymmetric bow correction
GUI – Installation
R5906852 /06 F80 87