Introduction; Connection Panel - Barco F80 User Manual

Input & Communication

3.1 Introduction

General
The Input & Communication features of the projector consists of a local keypad and a communication panel
situated at the left side, and a connection panel (sources and control connections) located at the back side.
1
Image 3–1
1 local keypad and a communication panel
2

connection panel

3.2 Connection Panel

General
Projector sources and control connections are located at the back of the projector.
1
Image 3–2
Nb.Name Pcs
1 DMX IN/ 2
OUT
2 RS-232 1
3 Sync 3
4 Trigger 2
5 RC 1
6 USB 2
7 LAN 1
26 R5906852 /06 F80
2
3
2 4 5
Description
DMX 512 input / DMX 512
output
9–pin DB9 connector
BNC Sync Port IN/OUT;
Bidirectional mini-DIN (1x 3D
sync Out, and 2x Sync In/Out)
12VDC - 0,5A (6W)
Mini jack 3,5mm connector for
wired remote
USB 2.0 type A, 4 pin( 2x
Rear and 1x Front)
Standard RJ45 connector
6 8
7 9
Purpose
For Projector Control. DMX connectors allow to
create communication bus between different
devices in order to control them from a console.
For Projector Control. Allows for wired remote
control and monitoring of many projector
functions used in installation environments
For Projector Control. This is mainly used in
multiple projector installations with requirement of
synchronization between the units
For Controlling Peripherals, like motorized
screens, curtains etc. Give 12V output when
projector are switched onSee also the note
below.
For Projector Control
For Software upgrade
For Projector Control
10 11 12