Barco F80 User Manual page 78

GUI – Installation
Scaling Mode Explanation
Fill aspect Default scaling mode.
Stretches the image to the native resolution of the
DMD, while respecting the original aspect ratio.
1:1 An exact rendering of the source signal, which may be
smaller than the native resolution
Fill screen Fills the screen to the screen size defined in the Screen
Size menu, while respecting the original aspect ratio.
For more info on adjusting the Screen Size menu, see
"Warping – Screen Size", page
Stretch This mode stretches the image to the screen size
defined in the Screen Size menu, while ignoring the
original aspect ratio. For more info on adjusting the
Screen Size menu, see
80.
Setting a scaling mode
1. In the main menu, select Installation → Scaling.
Image 8–16 Installation menu, scaling
The scaling mode menu is displayed.
1. Example using a screen of 2,35:1, an input signal of 4:3 and a projector with a native resolution of 3840 x 2400
78 R5906852 /06 F80
80.
"Warping – Screen Size", page
Example image 1