Checking The Status Of The Laser Banks - Barco UDX Series User Manual

Image 9-36: Reset menu
2. Navigate to the checkbox next to the settings that need to be reset and press OK.
Multiple selections are possible.
3. Select RESET and press OK to reset all selected settings.

9.10 Checking the status of the Laser Banks

About failing laser banks
The projector is powered by a laser light source, which has multiple laser banks. The light output and color
performance is dependant on the number of active laser banks.
If one or more laser banks have failed of a certain type, you will notice a decreased light input and decrease in
color performance. But the projector will keep on playing, unless too many banks of a certain color will have
failed.
In order to disable a certain laser bank, or calibrate the projector after disabling one or more laser
banks, please refer to the Projector Toolset User Manual.
How to check the status of the Laser Banks
1. In the main menu, System Settings → Service.
Image 9-37
2. Enter the service code.
3. In the Service menu, select Laser Banks.
Image 9-38: Service menu, Laser Banks
GUI – System Settings
R5906112-06 UDX series 115