Safety Labels - Loma X5c Operating Instructions Manual

12

Safety Labels

Safety labels are attached or etched in appropriate places to highlight areas of the system
where caution should be taken to avoid potential hazards. The labels used are listed and
described below.
Label
CE Mark / Machine identification etched on the machine includes:
Caution: X-Ray Hazard
Do not insert any part of the body when the system is energised.
Caution: Electric Shocks
Includes voltage and phase details which will vary dependant on the
available supply.
Caution: Hazardous Machinery
All machinery has a potential for being hazardous if the appropriate level of
care is not taken and any safety warnings not followed.
Caution: Pneumatic Reject Device
Reject devices operate very quickly to remove contaminated products
from a fast moving production line. Care should be taken to avoid contact
with a reject device when it is operating.
Caution: X-Ray Hazard
Do not remove this bin or cover, it forms part of the radiation shielding.
Caution: Pinch Point
Moving parts of machines, specifically conveyors, provide opportunities for
trapping fingers or even items of clothing in the mechanism if care is not
taken.
Caution: Isolate Machine Before Maintenance
Electrical power should be disconnected before carrying out maintenance
operations that expose staff to potentially lethal voltages.
Caution: Isolate air supply before maintenance
Compressed air should be disconnected before carrying out maintenance
operations where reject devices could be activated accidentally.
Document Number: 814212-2.0-ENG
 Power supply data.
 Date of Manufacture.
 Serial Number.
Message
Safety First
Original Document