ABB RELION 615 Series Applications Manual page 25

1MAC109016-MB C
REF615 ANSI
Application Manual
Main unit Slot ID Content
Case X130 Optional RTD/mA
module
Optional AI/BI
module
Optional AI/RTD/mA
module
Optional BIO module
AI/BI module
Sensor input module
X000 Optional
communication
module
1) The 0.2/1 A input is normally used in applications requiring sensitive earth-fault protection and featuring
core-balance current transformers.
The rated input levels are selected in the software of the protection relay for phase current
and ground current. The binary input thresholds 18...176 V DC are selected by adjusting
the protection relay's parameter settings.
The optional BIO module can be added in the protection relay to all
standard configurations.
The connection diagrams of different hardware modules are presented in this manual.
See the installation manual for more information about the case and the
plug-in unit.
REF615 overview
Details
Optional for configuration D:
2 generic mA inputs
6 RTD sensor inputs
Only with configurations F and N:
3 phase voltage inputs (60...210 V)
1 residual voltage input (60...210 V)
4 binary inputs
Additionally with configuration N:
1 reference voltage input for SECRSYN1 (60...210 V)
Only with configurations F and N:
3 phase voltage inputs (60...210 V)
1 residual voltage input (60...210 V)
1 generic mA input
2 RTD sensor inputs
Additionally with configuration N:
1 reference voltage input for SECRSYN1 (60...210 V)
Optional for configuration D:
6 binary inputs
3 SO contacts
Only with configuration P:
6 phase voltage inputs (60...210 V)
3 binary inputs
Only with configuration L:
3 combi sensor inputs (three-phase current and voltage)
1 residual current input (0.2/1 A)
See the technical manual for details about different types of
communication modules.
Section 2
1)
19