Xy Calibration - Felix printers Pro L Quick Start Manual

13 XY calibration

The process of aligning the X and Y offsets of the 2 extruders is crucial for dual color and multi material printing. With this calibration
the machine will print an example that you can match together, after it's done the machine will ask which point from 1 to 9 matches
the best and stores these offsets. You should do this before dual color printing and after changing a hot end.
First load both extruders with PLA filament
Go to the Printer Calibration menu and press the Calibrate XY button.
The machine warms up the bed and extruders. Then prints the calibration object. Follow instructions on the screen and
-
choose the best match for x and y direction.
It is recommended to perform this twice as extra verification that the offsets are correct. The middle point or 5 in this case
-
should match, press the number that best matches, into the screen and repeat the process if it's not 5.
Quick Start Guide FELIX Pro L / XL
Page 29