Power Loss Recovery - Felix printers Pro L Quick Start Manual

10 Power loss recovery

The Pro L and XL feature a power loss recovery system that helps safe prints due to power failure or blackouts. In case of a power
loss, please follow the next steps to save your print-job. If you see below message the printer has entered to a power loss recovery
state, to release the printer from this state press the rescue print button.
First press the resend connection script and follow the checklist.
ONLY IF the status of the printed object passes the checklist, press continue. IF NOT, it is strongly recommended to cancel/stop the
print job. When the continue print button is pressed the printer starts reheating and it recalculates the print job to see where it
stopped. This process can take several minutes. After this step the printer continues with the print-job and has saved the print from
failure.
Page 21
Quick Start Guide FELIX Pro L / XL