Felix printers Pro L Quick Start Manual page 16
Hide thumbs
Also See for Pro L:
- Troubleshooting manual (21 pages) ,
- Calibration manual (15 pages) ,
- Firmware update (12 pages)
Table of Contents
Advertisement
1.
Select the left (1) or right (2) extruder
2.
Press insert filament. The print-heads will warm up and takes about 1 minute.
3.
Now continue by pressing start. While inserting the filament, help the printer by pushing it downwards in the extruder until you
feel the printer has gripped the filament.
4.
Continue extruding until filament comes out of the printhead.
Remove the deposited filament with the supplied tweezer.
Quick Start Guide FELIX Pro L / XL
Page 15
Advertisement
Table of Contents
