Table of Contents
Advertisement
8 Preparation for printing
8.1 Calibration.
IMPORTANT: Only PERFORM BED LEVELING after unboxing. The printer is already fully factory calibrated.
Bed leveling: This physically tilts the bed so the distance between nozzle and bed is the same everywhere.
When to do this?:
1.
After unboxing/moving printer.
2. When you see first layer printed lines are deviating from width across the print surface.
XY and Z Nozzle calibration: These calibrations align the printheads with respect to each other to get an
optimal dual head print. When to do this?
1.
After exchanging a hot-end
2. When you clearly see that during dual head printing the nozzles are not aligned in x,y or height.
Quick Start Guide FELIX Pro 3 Touch
25 January 2019
14
Page
Advertisement
Table of Contents
