Xy Calibration - Felix printers Pro Series Calibration Manual

7 XY calibration

Intro
The process of aligning the X and Y offsets of the
2 extruders is crucial for dual color and multi
material printing. With this calibration the
machine will print an example that you can
match together. After it's done the machine will
ask which point from 1 to 9 matches the best and
stores these offsets. You should do this before
dual color printing and after changing a hot end.
See the instructions, on how to do this but first
load both extruders with PLA.
FELIX Pro Series
Touchscreen
After this the machine will heat up and start printing
the example. Insert the best matching points into the
screen, you usually have to do this twice to match the
offset correctly. See the example below.
8
Page