Felix printers Pro L Quick Start Manual page 21

1. Press Upload G-Code, to upload a gcode for printing to the
library
After Uploading the touchscreen will render an Image for printing.
2. Press the print icon, the print will start.
1.1.4 Webcam monitoring
You can conveniently monitor a print-job via the webcam. For now this is only enabled on the internal network. If you want to access
this from an external network, a port needs to be forwarded in your router directed to the IP-address of the printer.
Navigate to the webcam tab for further information
1.1.5 Time-lapse
You can create a time lapse video of your print you can find this option under the webcam tab in the browser
Quick Start Guide FELIX Pro L / XL
2
1
Page 20