Safety - Felix printers Pro L Quick Start Manual

1

Safety

General safety
Keep children under the age of 14 out of reach of the
-
printer
FELIXprinters are only suitable for professional use.
-
Considerations when in operation.
Don't leave the printer unattended, before making sure the
-
first layer is printed properly
Don't lean on the printer.
-
Be careful with long hair and wide clothes.
-
Don't transport the printer.
-
Make sure all moving parts can move without any
-
obstructions.
Don't remove any objects from the hot plate while printing.
-
Caution with any moving parts that move in the X, Y and Z
-
direction. Moving parts can have a pinching hazard.
Electronic safety
Only use the power supplies and cables supplied by
-
FELIXprinters. Always turn off and unplug the printer before
performing maintenance or modifications.
The power supply meets all CE mark regulations and is
-
protected against short-circuit, overload, over voltage and
over temperature.
Printer placement
Place the FELIXprinter on a stable surface.
-
Quick Start Guide FELIX Pro L / XL
Place the printer out of reach of children.
-
Use the FELIXprinter in a dry environment at room
-
temperature.
Ventilate
Good ventilation while printing is advised. When
-
printing ABS, small concentrations of styrene vapor can
be released. This can (in some cases) cause headaches,
fatigue, dizziness, confusion, drowsiness, malaise,
difficulty in concentrating, and a feeling of intoxication.
We recommend using filament types shown on the
-
FELIXprinters website. Examples PLA, PETG, ABS-X,
Glassbend etc. Other types may be toxic; please follow
instructions from the filament supplier.
Caution with heater elements
There is a potential risk of burn, as the print head can
-
reach temperatures of up to 275°C and the heated bed
of up to 120°C.
Don't place objects on the heated bed, not even when
-
the printer is turned off.
Always let the printer cool down for at least 5 minutes
-
before doing maintenance or modifications.
Never try to print without a buildplate in the machine,
-
this can cause damage to the machine and heated bed.
Page 1