9 Printing
This chapter describes the several options to start a print job. Starting with the easiest first.
9.1 Print via USB stick
Insert the USB stick supplied with the printer and press refresh and press USB stick button
A file-list should appear. Select one of the prints,
When you press the gcode file, you get two options.
1.
You can save it to the internal library of the touchscreen or
2.
Directly print it from the USB stick. The file is temporarily copied to the screen and the print will start. You can safely
remove the USB stick without disturbing the print-process.
Start the PRINTJOB supplied with the printer first to ensure proper functioning.
IMPORTANT NOTES/RECOMMENDATIONS
Clean/prepare the print bed before starting a print.
✓
Never leave the printer before visually seeing that first layer is printed ok
✓
✓
Always use filament accessories for proper filament guiding and long lifetime of hot-end.
Quick Start Guide FELIX Pro L / XL
Page 16