Felix printers Pro Series Quick Start Manual
Cold pull method
Hide thumbs
Also See for Pro Series:
- User manual (51 pages) ,
- Quick start manual (48 pages) ,
- Troubleshooting manual (21 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Felix printers Pro Series
Summary of Contents for Felix printers Pro Series
- Page 1 17 september FELIX Pro L/XL 2019 Cold pull method Revision 1...
-
Page 2: Setting The Temperature
Cold pull method Problem: One of the extruders is making a clicking noise or not pushing out the filament? Cause: It’s most likely clogged or partially clogged. Follow this guide to use the cold pull method to fix the extruder or just to clean it., This is also recommended when switching materials. - Page 3 Press the start button. Filament coming out but with some sputtering or you can hear the motor click? Then it’s a good idea to do the method described below. No filament coming out or just a little bit? Try forcing it through by hand and see if anything comes out of it, if that doesn’t help try this method anyhow if you still can’t get some material through you might have to change the nozzle.
- Page 4 Set the extruder temp to 90°C (194°F) and the fan to 100%, you can do this in the printer status menu. After that navigate to the move menu and turn off the motors so you can freely move the head around and to make sure the extruder isn’t engaged anymore.
- Page 5 Move the head to the middle of the bed manually so you can reach it better, also take of the top cover. After that grab the filament with one hand and press in the spring with the other, now pull out the filament with one swift motion.
- Page 6 Review our products Help us to improve our products and services. It only takes a few minutes! www.felixprinters.com/survey (a small reward is waiting for you) Manuals & tutorials FELIX Community www.felixprinters.com/support www.felixprinters.com/community Quick Start Manual FELIX Pro L/XL V3 - 2019 www.felixprinters.com/support Zeemanlaan 15 support@felixprinters.com...