Analogue Inputs - Deif SGC 120 User Manual

Level 2
Activation Delay
(ACTIVATION DELAY)

6.2.4 Analogue inputs

Table 6.7 Analogue Input 1 (ENG TEMP / DIG G)
Level 2
Use Input As
(SENSOR SELECTION)
(Digital) Source
((DIG) SOURCE)
Name
(NAME)
(Digital) Polarity
((DIG) POLARITY)
(Digital) Action
((DIG) ACTION)
(Digital) Activation
((DIG) ACTIVATION)
(Digital) Activation Delay
((DIG) ACTIVATION DELAY)
(ETS) Circuit Fault Action
(OPEN CKT ALARM)
(ETS) Engine Temperature Sensor Calibration Table
Table 6.8 Analogue Input 2 (FUEL LVL / DIG H)
Level 2
Use Input As
(SENSOR SELECTION)
(Digital) Source
((DIG) SOURCE)
Name
(NAME)
(Digital) Polarity
((DIG) POLARITY)
(Digital) Action
USER MANUAL 4189341226A UK
Range
Always
0 to 60 s
Range
Not used
Digital Input G
Anlg In Eng Temp
See Digital input source selection in this document
Auxiliary Input G
Close to Activate
Open to Activate
None
Notification
Warning
Electrical Trip
Shutdown
Never
From Engine Start
From Monitoring On
Always
1 to 60 s
None
Notification
Warning
Electrical Trip
Shutdown
Resistance: 0 to 1000 Ω
Temperature: 25 to 300 °C
Range
Not used
Digital Input H
Fuel Level Sensor
See Digital input source selection in this document
Auxiliary Input H
Close to Activate
Open to Activate
None
Page 25 of 72