Deif SGC 120 User Manual page 27

Level 2
(Digital) Activation
((DIG) ACTIVATION)
(Digital) Activation Delay
((DIG) ACTIVATION DELAY)
(LOP) Circuit Fault Action
(OPEN CKT ALARM)
(LOP) Lube Oil Pressure Sensor Calibration
Table 6.10 Analogue Input 4 (LOP/DIG I)
Level 2
Use Input As
(SENSOR SELECTION)
(Digital) Source
((DIG) SOURCE)
Name
(NAME)
(Digital) Polarity
((DIG) POLARITY)
(Digital) Action
((DIG) ACTION)
(Digital) Activation
((DIG) ACTIVATION)
(Digital) Activation Delay
((DIG) ACTIVATION DELAY)
(LOP) Low Level Shutdown
(SHUTDOWN)
(LOP) Low Level Shutdown Threshold
(SHUTDOWN THRESHOLD)
(LOP) Low Level Warning
(WARNING)
(LOP) Low Level Warning Threshold
(WARNING THRESHOLD)
(LOP) Circuit Fault Action
(OPEN CKT ALARM)
USER MANUAL 4189341226A UK
Range
Shutdown
Never
From Engine Start
From Monitoring On
Always
1 to 60 s
None
Notification
Warning
Electrical Trip
Shutdown
Resistance: 10 to 100 Ω
Pressure: 1.0 to 10.0 bar
Range
Not used
Digital Input I
S4 Sensor (4-20 mA LOP)
See Digital input source selection in this document
Auxiliary Input I
Close to Activate
Open to Activate
None
Notification
Warning
Electrical Trip
Shutdown
Never
From Engine Start
From Monitoring On
Always
1 to 60 s
Enable
Disable
0.0 to 9.8 bar
Enable
Disable
0.2 to 10.0 bar
None
Notification
Warning
Electrical Trip
Page 27 of 72