Deif SGC 120 User Manual page 21

Engine fuel balance
Contactor status
1
L2 and L3 phases are only visible if the controller is configured for a 3-phase genset.
2
The display is only visible if the corresponding sensor is configured.
3
The display is only visible if the event is enabled in the controller's configuration.
4
The display is only visible if the output related to genset and mains contactors are configured.
USER MANUAL 4189341226A UK
2
4
3
Auto Exercise 1
Alarms (example)
3
Auto Exercise 2
Product info
Page 21 of 72