Engine Communication Settings - Deif SGC 120 User Manual

11.5 Engine communication settings

Use the DEIF Smart Connect software to configure engine communication in the SGC controller.
Open DEIF Smart Connect and connect to the SGC controller, then select Start > Engine > Engine Control unit (ECU) for the
engine communication settings window.
No. Function
1 Select the engine type from the drop-down list.
2 Select types of measurements from the engine/ECU.
3 Configure the settings for the ECU communication failure alarm.
Configure the settings for the diagnostic lamps on the ECU
• Amber lamp
• Red lamp
4
• Malfunction lamp
• Protect lamp
See the specific documentation for the engine/ECU for more information.
Select the actions that SGC controls for the engine/ECU
• Engine speed
5
• Engine start/stop
• Engine preheat
Configure source addresses for the SGC controller and the engine/ECU.
6
See the specific documentation for the engine/ECU for information about the source address.
USER MANUAL 4189341226A UK Page 57 of 72