Manual Mode - Deif SGC 120 User Manual

Deep sleep mode
Deep sleep mode is a useful feature to extend the battery lifetime. This is done by suspending normal functions of the controller, and
place the it in the lowest power consumption state. The controller maintains the status and alarms it had before Deep sleep mode.
When the controller wakes up, normal operations are resumed automatically.
The controller goes to Deep sleep mode when there is no user interaction for the preset Deep sleep mode delay. The controller does
not go to Deep sleep mode under the following conditions:
• In Auto (AMF, Remote start/stop and Exercise) modes
• Mains monitoring is enabled, and mains contactor configured as output
• Modbus communication is enabled
To wake the controller from Deep sleep mode, press:
• Stop/Config button
• Start button
• Mode selection button
• Acknowledge button

7.2 Manual mode

USER MANUAL 4189341226A UK Page 43 of 72