Passwords - Deif SGC 120 User Manual

Features
EEPROM for extended event logs OR regional languages
CANbus Engine Interface
RS-485 Interface for Modbus
DC battery supply voltage (with -32 V reverse protection)
Operating temperature range
Protection class with gasket (included)
Warning auto clear enable/disable
Fuel reference selection input
On the fly mode change when engine is healthy/engine off
Analogue 0-5 V input for Speed bias input for E-gov from Load sharing module
E-gov actuator output
*Note: SGC 121 only.

1.4 Passwords

The controller is protected from set-up changes with a four digit password.
There are two password levels:
Level
1
2
The passwords can be changed on the controller:
1. Go to Configuration mode.
2. Log on with password level 1.
3. Use the Up and Down
4. Use the Up and Down
5. Use the Up and Down
6. Repeat for the next three digits.
7. When all four digits are chosen, the display shows
PASSWORD 1
Password changed
USER MANUAL 4189341226A UK
Access
Full access (read and write)
Limited access (read)
buttons to go to Misc Settings, select with the Start
buttons to go to the password to be changed, select with the Start
buttons to choose the first digit for the new password, select with the Start
Specifications
Factory setting
0123
1234
button.
button.
button.
Yes
Yes
Yes
8 to 28 V
-20 to 65 °C
IP65
Yes
Yes
Yes
Yes*
Yes*
Page 5 of 72