Toolkits, Dresspack/Spotpack - ABB DressPack IRB 6620LX Product Manual

6.6 Toolkits, DressPack/SpotPack

General
All service (repair, maintenance and installation) instructions contain lists of tools
required to perform the specified activity. All special tools, that is all tools that are
not considered standard as defined below, are listed in their instructions
respectively.
This way, the tools required are the sum of the Standard Toolkit and any tools
listed in the instruction.
Standard toolkit
This standard toolkit contains a set of standard tools used for DressPack/SpotPack,
3HAC17290-7.
Qty
1
1
1
1
2
1
1
Toolkit, cables
This toolkit contains tools needed for work with cables:
Qty
1
1
1
1
1
1
1
1
Product manual - DressPack/SpotPack IRB 6620LX
3HAC055327-001 Revision: A
Article number Tool
- Socket head cap, 5-17mm
- Torx socket no: 20-60
- Phillips screwdriver, small
- Flat screwdriver, medium
- Ring-open-end spanner 8-19 mm
- Open end wrench, 27 mm.
- Open end wrench, 36 mm
Article number Tool
0999 000 0171 (D- Removal and Insertion tool for pins and
sub) sockets
0999 000 0012 Removal tool for pins and sockets
(HAN DD)
0999 000 0319 Removal tool for pins and sockets
(HAN EE)
0999 000 0059 Insertion tool for pins and sockets
(HAN DD and HAN
EE)
- Stripping pliers
09 99 000 0021 Crimping tool HARTING with locator
09 99 000 0001 Crimping tool BUCHANAN, HARTING
09 99 000 0175 Crimping tool HARTING
09 99 000 0169
© Copyright 2016-2017 ABB. All rights reserved.
6 Reference information
6.6 Toolkits, DressPack/SpotPack
Note
-
-
For Harting connectors
For Harting connectors
For water connectors on water
and air unit
For Tension arm unit and water
connectors on DressPack
For water connectors on
DressPack
Note
Art. no. from Harting
Art. no. from Harting
Art. no. from Harting
Art. no. from Harting
Art. no. from Harting
Art. no. from Harting
Art. no. from Harting
111