Safety Risks Related To Tools/Work Pieces - ABB DressPack IRB 6620LX Product Manual

1 Safety

1.2.4.3 Safety risks related to tools/work pieces

1.2.4.3 Safety risks related to tools/work pieces
Safe handling
It must be possible to safely turn off tools, such as milling cutters, etc. Make sure
that guards remain closed until the cutters stop rotating.
It should be possible to release parts by manual operation (valves).
Safe design
Grippers/end effectors must be designed so that they retain work pieces in the
event of a power failure or a disturbance to the controller.
Unauthorized modifications of the originally delivered robot are prohibited. Without
the consent of ABB it is forbidden to attach additional parts through welding,
riveting, or drilling of new holes into the castings. The strength could be affected.
Ensure that a gripper is prevented from dropping a work piece, if such is used.
22
CAUTION
© Copyright 2016-2017 ABB. All rights reserved.
Product manual - DressPack/SpotPack IRB 6620LX
3HAC055327-001 Revision: A