ABB DressPack IRB 6620LX Product Manual page 81

10
11
12
13
Product manual - DressPack/SpotPack IRB 6620LX
3HAC055327-001 Revision: A
Action
If used, connect the split box cable to the
water and air unit on the robot and to the
spot welding cabinet (if no PROFINET is
available) or to the single cabinet controller
(if PROFINET is available) connectors.
If used, connect the stationary/pedestal
gun process cable to the stationary/pedes-
tal gun connectors and to the spot welding
cabinet (if no PROFINET is available) or to
the single cabinet controller (if PROFINET
is available).
If used, connect the weld power cable to
the spot welding cabinet and to the robot
or the stationary/pedestal gun (depending
on if it is variant Se or HSe).
If used, connect the resolver cable to the
robot base and to the stationary/pedestal
gun.
© Copyright 2016-2017 ABB. All rights reserved.
2 Installation
2.5.1 Installation of DressPack floor
Note
See circuit diagram and the
on page 113 chapter.
A stationary/pedestal gun is optional.
See circuit diagram and the
on page 113 chapter.
See circuit diagram and the
on page 113 chapter.
See circuit diagram and the
on page 113 chapter.
Continued
Spare parts
Spare parts
Spare parts
Spare parts
81