Advertisement
Care and maintenance
Cleaning the machine
The grinding heads and their mechanical mountings can be
washed and cleaned by thoroughly flushing them with water.
The cab can be cleaned with water, but with the restriction
that water must not penetrate via the moulding around the
entrance door to the cab. When wiping off windows, particu-
lar attention must be paid when cleaning the side windows,
as these are made of plastic and become scratched more
easily than glass. Use a damp, lint-free, soft, clean cloth to
achieve the best results.
Bearing in mind the risk of electric flashover, machine cov-
ers and the dust separation system must only be cleaned
with a dry cloth or brush.
Refuelling the diesel engine
When filling up with diesel, the machine must be earthed
(potential equalised) before refuelling. This is done to coun-
teract sparking in conjunction with handling of the fuel.
47
Advertisement
Chapters
