Advertisement
Presentation
System description – Interface touch-screen – Service
Under the "service menu" (see fi gure 1) there are a number
of control buttons, from where some of the machine's func-
tions are controlled.
In the upper left-hand fi eld there is a button for turning the
machine's headlights on and off. The lighting is activated by
pressing the button marked "Light". When the headlights are
lit, this is indicated by the round symbol above the button
glowing green. Mist Cooler System is activated by pressing
"MIST". While this system is starting up, the marking is yel-
low. When the system is activated, the marking glows green.
The same procedure applies for "GRINDING PRESSURE".
The system for adjusting the grinding pressure allows the
grinding pressure to be increased by up to 80 kg extra per
grinding head.
The dust separators are operated in the VAC CONTROL
fi eld.
Pressing the EMPTY VAC - LEFT or EMPTY VAC - RIGHT
button turns off the suction function for the selected side.
When the lamp indicates green beside the button (can take
up to 30 seconds), the Longopac® sack can be replaced. In
order to reactivate the selected suction, press the same but-
ton again on the touch-screen and the display will indicate
red again when the suction has been reactivated.
The emptying interval can be regulated by the SOFT
GRINDING button indicating red or green, where green indi-
cation in the event of HEAVY GRINDING means that empty-
ing takes place at short intervals.
Figure 1. Service menu
The "METERS" fi eld displays indications of how much fuel
or water to the "Mist Cooler System" remains.
The lower right-hand fi eld contains indications which show
whether the grinding heads are in their locked positions. A
green indication shows that the grinding head is in a locked
position and is ready for tool replacement. As long as the
indication is red, there is a risk of crushing under the grind-
ing heads.
28
Advertisement
Chapters
