Introduction to the HTC 2500 iX
The HTC 2500 iX entails a new way of looking at floor
grinding. An "industrialised grinding" system, incorporating
everything from grinding heads, a dust separator and its
own drive, all in one. This makes it the first totally integrat-
ed, ride-on floor grinding system ever. The machine has
been adapted to cope with tough work, and has therefore
been provided with extremely robust technology to tackle
long shifts on large and demanding surfaces.
Driving comfort has been optimised to ensure maximum
control of all the machine's functions in a safe and easy-
to-understand manner. With "ergonomics and maximum
grinding capacity" as key philosophies during production,
the HTC 2500 iX has been developed to ensure high
levels of adaptability and service-friendliness, as well as
being supplied with the latest technology for maximum
grinding performance. In the cab, which has been insulat-
ed against sound and dust particles and adapted to cope
with the toughest environmental requirements, the driver
sits in comfort, well separated from the harsh environ-
ments that often arise in conjunction with grinding work.
The HTC 2500 iX has an enormous capacity. One ma-
chine is equivalent to up to ten traditional manned grind-
ing systems and associated dust separators! Once again,
HTC has moved the concept of floor grinding a significant
step into the future. Welcome on-board the world's most
efficient industrial grinding system, the HTC 2500 iX.
Technical specification for HTC 2500 iX
•
Engine: 4 cyl. Perkins Diesel 4.4 litres
•
Engine output: 157 hp (117 kW)
•
Fuel tank: 210 litres
•
Water tank: 55 litres
•
Generator: 120 kVA, 400 V, 60 Hz
•
Suction system: Automated vacuum cleaner
•
Suction effect: 19.5 kW
•
Operation: 2x6 kW motors
•
Wheel dimensions: 16" and 12"
•
Machine weight: 6,300 kg
•
Height: 2445 mm
•
Length: 5412 mm
•
Width: 2490
•
Turning radius: 50°
•
Tyre pressure: 1.125 – 1.5 Mpa (11.25 kg/m2 – 15.00
kg/m2)
Technical specification for the HTC 2500 iX
grinding machine
•
Motor output: 3x15 kW
•
Current: 32 A
•
Weight, grinding head: 3x310 kg
•
Pressure, grinding head: Variable adjustment (310 +/-
80 kg)
•
Dimensions, grinding disc: 12x270 mm
•
Total grinding width: 2400 mm
•
Revs/minute: 450 – 1,400 rpm
•
Suspension 3D suspension
•
Height adjustment: electric
14