Maintenance Section; Refill Capacities - HTC 2500 iX Manual

SEBU7833-03

Maintenance Section

Refill Capacities
Refill Capacities
Lubrication System
The refill capacities for the engine crankcase
reflect the approximate capacity of the crankcase
or sump plus standard oil filters. Auxiliary oil filter
systems will require additional oil. Refer to the OEM
specifications for the capacity of the auxiliary oil filter.
Refer to the Operation and Maintenance Manual,
"Maintenance Section" for more information on
Lubricant Specifications.
1104 Engine
Table 5
1104 Engine
Compartment or System
Standard Oil Sump for the Engine
Crankcase
(1)
(1)
These values are the approximate capacities for the crankcase
oil sump which include the standard factory installed oil filters.
Engines with auxiliary oil filters will require additional oil. Refer
to the OEM specifications for the capacity of the auxiliary oil
filter.
1103 Engine
Table 6
1103 Engine
Compartment or System
Standard Oil Sump for the Engine
Crankcase
(1)
(1)
These values are the approximate capacities for the crankcase
oil sump which include the standard factory installed oil filters.
Engines with auxiliary oil filters will require additional oil. Refer
to the OEM specifications for the capacity of the auxiliary oil
filter.
This document is printed from SPI². Not for Resale.
Cooling System
To maintain the cooling system, the Total Cooling
System capacity must be known. The approximate
capacity for the engine cooling system is listed
below. External System capacities will vary among
applications. Refer to the OEM specifications for the
External System capacity. This capacity information
i02198350
will be needed in order to determine the amount
of coolant/antifreeze that is required for the Total
Cooling System.
1104 Engine
Table 7
Engine Only
External cooling system capacity
(OEM recommendation)
Total Cooling System
(1)
(2)
Liters Quarts
Table 8
6.5 7
Engine Only
External cooling System capacity
(OEM recommendation)
Total Cooling System
(1)
Liters Quarts
(2)
7
6.5
1104 Naturally Aspirated Engine
Compartment or System
(1)
(2)
The external cooling system includes a radiator or an
expansion tank with the following components: heat exchanger,
aftercooler, and piping. Refer to the OEM specifications. Enter
the value for the external system capacity in this row.
The Total Cooling System includes the capacity for the engine
cooling system plus the capacity for the external cooling
system. Enter the total in this row.
1104 Turbocharged Engine
Compartment or System
(1)
(2)
The external cooling system includes a radiator or an
expansion tank with the following components: heat exchanger,
aftercooler, and piping. Refer to the OEM specifications. Enter
the value for the external cooling system capacity in this row.
The Total Cooling System includes the capacity for the engine
cooling system plus the capacity for the external cooling
system. Enter the total in this row.
37
Maintenance Section
Refill Capacities
Liters Quarts
10.4 11
Liters Quarts
11.4 12