HTC 2500 iX Manual page 148

22 SEBU7833-03
Product Information Section
Product Identification Information
Label for engines that comply with
MSHA emissions
g01381316
Illustration 19
Typical example
The label that is shown in illustration 19 is for engines
that operate in underground coal mines in North
America. The label is installed on engines that comply
with the Mine Safety and Health Administration
(MSHA) emissions. Approved diesel engines shall
be identified by an approved mark that is legible
and permanent. The approved mark is scribed with
the approved MSHA number. The label should be
securely attached to the diesel engine.
Label for engines that do not
comply with emissions
g01156734
Illustration 20
This typical example of a label is installed on engines that do not comply with emissions.
This document is printed from SPI². Not for Resale.