Cleaning; Every Week; Maintenance And Repairs - HTC 800 Classic Manual

Maintenance and repairs

5 Maintenance and repairs
5.1 General Information
We recommend regular inspections of all seals.
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.
Warning!
Use protective equipment such as safety shoes, safety goggles, protective
gloves, breathing mask and ear muffs.
5.2

Cleaning

Warning!
Do not clean the machine using a high-pressure washer. Otherwise moisture
may penetrate electrical elements and damage the machine's drive system.
• Vacuum the electrical cabinet, if required.
• Always clean the machine after use with a damp sponge or cloth.
5.3 Daily
• Wash the machine if it is used for wet grinding.
• Check for wear to the grinding tool – abnormal or uneven wear may indicate a
damaged grinding holder.
• Check the tool holder and grinding holder to ensure that no damage or cracks
have arisen. Replace the parts if there is any damage.
5.4

Every week

• Wash the machine.
• Check the grinding holders. Remove the tools and run the machine in mid air at
the slowest speed. If the grinding holders oscillate or wobble significantly, they
are damaged.
• Check that the upper belt is whole, by turning the large disc in one direction or
the other. If there is resistance the belt is whole, if the disc rotates freely the belt
is broken.
20
HTC 800 Classic
1.0