Advertisement
Operation
4. Turn the "Ignition" key fully clockwise and crank the en-
gine until the engine starts.
OK
OK
OFF
ON
OFF
ON
OFF
ON
Grinding
Speed
OFF
ON
On
Main Power
Off
Warning
HTC 2500 iX
5. When the engine starts, release the key and allow it to
return.
6. If the engine does not start, release the start key and
allow the electric starter motor to cool. Then repeat steps 4
and 5.
7. The engine initially runs at idle speed to ensure lubrica-
tion for all parts, and automatically speeds up to working
rpm after approximately 30 seconds. Let the control display
boot until "CONTINUE" can be seen on screen.
8. Start the dust extractor and reverse driving control moni-
tor. See page 19, pos 1.
9. Position all steering and turning joysticks in neutral
10. Check that the steering, grinding, VAC control and
grinding head position controls are in their central, neutral
position.
11. Press the "CONTINUE" button on the control display.
OK
OK
OFF
ON
OFF
ON
OFF
ON
Grinding
Speed
OFF
ON
On
Main Power
Off
Warning
HTC 2500 iX
33
Advertisement
Chapters
