Advertisement
Presentation
Cab – function of controls
1. Reversing monitor and dust waste monitor. Two cameras
are installed in the rear part of the machine to monitor dust
waste bags from the dust separators and to monitor the ma-
chine when e.g. reversing.
2. Air conditioning controls.
3. Surveillance monitor with touch-sensitive screen. This
monitor is used to check and control a number of functions,
such as the mist cooler system and grinding pressure.
4. Control panel. The control panel is used to regulate the
machine's power supply, diesel engine, grinding heads and
suction system.
5. Bottle/Drinks holder.
6. Stereo system.
7. Joystick – steering control. This control checks the ma-
chine's turning movements to the right and left.
8. Fire extinguisher. Used in an emergency to extinguish
fire. Checked regularly in order to safeguard function.
9. Joystick – direction control. This control governs the ma-
chine's movements and speed for operation forwards and
backwards. Increased deflection of the joystick forwards or
backwards increases the speed in the corresponding direc-
tion.
10. Emergency hammer. This is only used in an emergency
as a tool to break the window glass to allow rapid evacu-
ation of the cab or when the regular evacuation route, the
door, is blocked. The hammer is located above the cab's
front window to the left.
11. Warning lamps for low oil pressure, low battery voltage
and a warning lamp for high coolant temperature in the die-
sel engine.
22
Advertisement
Chapters
