Table of Contents
Advertisement
Maintenance and repairs
5
Maintenance and repairs
5.1
General Information
We recommend regular inspections of all seals.
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.
Warning!
Use safety equipment such as safety shoes, safety glasses, protective gloves, a
mask and hearing protection.
5.2
Cleaning
Warning!
Do not clean the machine using a high-pressure washer. Otherwise, moisture
may penetrate electrical elements and damage the machine's drive system.
•
Vacuum clean the control cabinet, if required.
•
Always clean the machine after use with a damp sponge or cloth.
5.3
Daily
•
Wash the machine if it has been used for wet grinding.
•
Check for wear to grinding tools – abnormal or uneven wear may indicate a
damaged grinding holder.
•
Check the tool holder and grinding holder to ensure that no damage or cracks
have arisen. Replace the parts if there is any damage.
•
Check that the brush strip on the grinding cover is not damaged and that it is
correctly attached.
5.4
Every week
•
Wash the machine.
•
Check the grinding holder. Remove the tools and run the machine in mid air at
the slowest speed. If the grinding holder oscillates or wobbles significantly, it is
damaged.
•
Check and clean the filter in the control cabinet.
30
HTC 270 EG
2.0
Advertisement
Table of Contents
